Quantitative determination of duloxetine and its metabolite in rat plasma by HPLC‐MS/MS

The major metabolite of duloxetine is a glucuronide conjugate of 4‐hydroxy duloxetine (4‐HD). However, interestingly, there have been no reports determining concentrations of 4‐HD and no fully validated method has been established for measuring duloxetine and 4‐HD in rat plasma. We developed a method for the simultaneous quantification of duloxetine and its metabolite in rat plasma using high‐performance liquid chromatography tandem mass spectrometry. Duloxetine and 4‐HD were analyzed on a reverse‐phase C₁₈ analytical column after protein precipitation of the plasma sample with methanol, using carbamazepine as an internal standard. The isocratic mobile phase of 5 mm ammonium acetate–methanol (4:6, v/v) was eluted at 0.4 mL/min. Quantification was performed on a triple‐quadrupole mass spectrometer using electrospray ionization, and the ion transition monitored in selective reaction monitoring mode. The coefficient of variation for assay precision was <18.0%, and the accuracy was 84.0–118.0%. This method was successfully used to measure the concentrations of duloxetine and its metabolite in plasma following the oral administration of a single 40 mg/kg dose in rats. Copyright © 2013 John Wiley & Sons, Ltd.     

Refolding of Laccase in Dilution Additive Mode with Copper-Based Ionic Liquid

Ionic liquids (ILs) are molten salts which do not crystallize at room temperature. Tunable physicochemical properties of ILs including hydrophobicity and polarity facilitate their applications in many biological processes. In this study, a copper-based IL was employed in order to enhance the refolding efficiency of laccase from Trametes versicolor which requires copper as a cofactor. When 1-ethyl-3-methylimidazolium trichlorocuprate ([EMIM][CuCl₃]) was added to refolding buffer instead of urea, the laccase refolding yield was improved more than 2.7 times compared to the conventional refolding buffer which contains urea. When the refolding of laccase was carried out at different temperatures (4, 25, and 37 °C), the highest refolding yield was obtained at 25 °C. At low temperature, two conflicting effects, i.e., suppression of the aggregate formation and decrease of folding rate, influence the protein refolding. In contrast, a copper-based IL did not enhance the refolding of lysozyme, a non-copper-containing protein. From these results, we can conclude that this copper-based IL, [EMIM][CuCl₃], was exclusively effective on the refolding process of a copper-containing protein.     

Improved Compatibility of Styrene-Maleic Anhydride Copolymer/Polyethylene Blends Through Reactive Mixing

Abstract

To improve the compatibility of styrene-maleic anhydride copolymer/low density polyethylene (SMA/LDPE) blends, LDPE grafted with 2-hydroxyethyl methacrylate-isophorone diisocyanate (LDPE-g-HI) was prepared and blended with SMA of which anhydride was converted to carboxylic acid (SMAAc). The infrared spectra of LDPE-g-HI established the presence of isocyanate group. In the blend morphology, some adhesions between the two phases and much finer dispersions were observed in the SMAAc/LDPE-g-HI blends, indicating that chemical reactions took place during the melt blending. The lower heat capacity change at the glass transition temperature demonstrated that chemical bonds were produced in the SMAAc/LDPE-g-HI blends. From the results of the rheological test, it was found that strong positive deviation from the mixing rule occurred in viscosity for the SMAAc/LDPE-g-HI blends, concerning with good adhesion and finer dispersions. In the measurement of tensile property, the improved mechanical properties for the SMAAc/LDPE-g-HI blends were shown.     

New Methods for β-Lactam Formation from β-Amino Acids Using (C6H5)3P/CC14 and (C6H5)3P/NBS

Triphenylphosphine/carbon tetrachloride and triphenyl-phosphine/N-bromosuccinimide were found to be very effective for β-lactam formation from β-amino acids in acetonitrile.     

A New Synthesis of α-Aryltelluro Esters

Aryltellurenyl iodides react with Reformatsky reagents in dry THF at room temperature rapidly to produce α-aryltelluro esters in good yields.     

Stetter Condensation Catalyzed by a Polymer-Bound Thiazolium Ylide

1,4-Diketones are obtained from reaction of enones with aldehydes in the presence of thiazolium ylide linked to a polymer matrix.     

Mapped WENO schemes based on a new smoothness indicator for Hamilton–Jacobi equations

In this paper, we introduce an improved version of mapped weighted essentially non-oscillatory (WENO) schemes for solving Hamilton–Jacobi equations. To this end, we first discuss new smoothness indicators for WENO construction. Then the new smoothness indicators are combined with the mapping function developed by Henrick et al. (2005) [31]. The proposed scheme yields fifth-order accuracy in smooth regions and sharply resolve discontinuities in the derivatives. Numerical experiments are provided to demonstrate the performance of the proposed schemes on a variety of one-dimensional and two-dimensional problems.     

Relationships between molecular structure and thermomechanical properties of bio‐based thermosetting polymers

Molecular dynamics simulations are used to study highly cross‐linked epoxy networks comprised of furanyl epoxy monomer, 2,5‐bis[(2‐oxiranylmethoxy)methyl]‐furan (BOF), that is cross‐linked by two furanyl amine hardeners, 5,5'‐methylenedifurfurylamine (DFDA) and 5,5'‐ethylidenedifurfirylamine (CH₃‐DFDA). Important properties of these fully furan‐based systems, including room temperature density, glass transition temperature, and Young's modulus are found to agree with previous experimental results. We also compare the simulated and experimental values of four fully furan‐based thermosetting materials to those using the conventional resin diglycidyl ether of bisphenol A (DGEBA) cured with the two furanyl hardeners. Our simulation results predict a slight decrease in density and Young's modulus, but no impact on the glass transition temperature, upon adding the methyl group in DFDA. Detailed analyses of the MD trajectories reveal the underlying mechanisms responsible for the observed structure/property relations, which center on the lack of collinear covalent bonds in the BOF molecular structure. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 285–292